LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (A960E) (Service Information)) >> Shift Solenoid Valve >> Installation >> Installation

Shift Solenoid Valve: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY  See step  1
  2. CONNECT TRANSMISSION WIRE  See step  2
  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY  See step  3
  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY  See step  4
  5. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY  See step  11
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. ADD AUTOMATIC TRANSMISSION FLUID 
  8. INSTALL NO. 2 ENGINE UNDER COVER 
  9. RESET MEMORY 
scientia non olet · About LEMON Manuals