LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 250 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System (Diagnostic Codes (P0171-P060E) >> SFI System >> DTC P0351: Ignition Coil "A" Primary / Secondary Circuit; DTC P0352: Ignition Coil "B" Primary / Secondary Circuit; DTC P0353: Ignition Coil "C" Primary / Secondary Circuit; DTC P0354: Ignition Coil "D" Primary / Secondary Circuit; DTC P0355: Ignition Coil "E" Primary / Secondary Circuit; DTC P0356: Ignition Coil "F" Primary / Secondary Circuit >> Typical Enabling Conditions

Typical Enabling Conditions

Monitor runs whenever following DTCs are not present None
Either of the following conditions 1 or 2 is met -
1. Starter OFF
2. Engine speed 1500 rpm or less
Either of the following conditions 3 or 4 is met -
3. Both of the following conditions (a) and (b) are met -
(a) Engine speed 500 rpm or less
(b) Battery voltage 6 V or more
4. All of the following conditions(c), (d) and (e) are met -
(c) Engine speed More than 500 rpm
(d) Battery voltage 10 V or more
(e) Number or sparks after CPU is reset 5 sparks or more