LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 250 AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> OEM System Circuits >> Multiplex Communication System (BEAN) >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
JA3 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Left Kick Panel)
JA4 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Right Kick Panel)
JQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Floor No. 2 Wire (Left Kick Panel)
JR2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Roof Wire (Front Pillar LH)
LP1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door RH Wire and Floor No. 1 Wire (Cowl Side Panel RH)
MQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door LH Wire and Floor No. 2 Wire (Cowl Side Panel LH)
MQ2
PQ2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS; : LOCATION OF GROUND POINTS Floor No. 1 Wire and Floor No. 2 Wire (Right Side of the Rear Floor Partition Panel)
PT1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Floor No. 1 Wire and Front Seat RH Wire (Under the Front RH Seat)