On-Vehicle Inspection
- INSPECT HOOD SUB-ASSEMBLY
- Check that the clearance measurements of areas A to D are within each standard range.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard clearance
Area Measurement A 2.2 to 5.2 mm (0.087 to 0.205 in.) B -0.6 to 2.4 mm (-0.024 to 0.095 in.) C 2.2 to 5.2 mm (0.087 to 0.205 in.) D -1.3 to 1.7 mm (-0.051 to 0.067 in.)
- Check that the clearance measurements of areas A to D are within each standard range.