DTC P0A1B-661: Drive Motor "A" Control Module: Procedure

CHECK INVERTER WITH CONVERTER ASSEMBLY (GENERATOR CABLE CONNECTION CONDITION) See step 4
C → CONNECT SECURELY

B → REPLACE MALFUNCTIONING PARTS

A: Go to next step
CHECK INVERTER WITH CONVERTER ASSEMBLY (MOTOR CABLE CONNECTION CONDITION) See step 5
C → CONNECT SECURELY

B → REPLACE MALFUNCTIONING PARTS

A: Go to next step
CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG1) See step 6
NG → See step 5

OK: Go to next step
CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG2) See step   7
NG → See step   5

OK → See step   6
REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY. Refer to COMPONENTS
REPLACE INVERTER WITH CONVERTER ASSEMBLY. Refer to COMPONENTS