DTC P0A08-101: DC / DC Converter Status Circuit: Procedure

1. Check that the air intake grill of the rear seat side garnish LH is not clogged.

   OK

   The air intake grill is not clogged.

NG → REMOVE FOREIGN OBJECT 

OK: Go to next step 

1. Check if the duct is installed correctly.

   OK

   The duct is installed correctly.

2. Check the duct for clogging.

   OK

   The duct is not clogged.

NG → REPAIR OR REPLACE AIR DUCT (ALL) 

OK: Go to next step 

1. Replace the hybrid vehicle converter. Refer toCOMPONENTS .

NEXT: Go to next step 

1. Turn the power switch on (READY).
2. Leave the vehicle for 5 minutes.
3. Measure the voltage according to the value(s) in the table below.

   Standard Voltage

   Tester Connection	Switch Condition	Specified Condition
   Terminals of the auxiliary battery.	Power switch on (READY)	10.5 V or higher

NG → CHECK AND REPLACE AUXILIARY BATTERY 

OK → COMPLETED