DTC U0101: Lost Communication with TCM; DTC U0073: Control Module Communication Bus Off; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Skid Control ECU; DTC U0142: Lost Communication with Main Body ECU; DTC U0293: Lost Communication with HV ECU; DTC U1000: Can Communication Failure(Message Registry): Procedure
- CHECK FOR DTC
- Clear the DTCs. Refer to DTC CHECK / CLEAR .
- Check for DTCs. Refer to DTC CHECK / CLEAR
.
OK
DTCs are not output.
NG → See step 3
OK → See step 2
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING