LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Vehicle Stability Control (Diagnostic Codes & Symptom Tests)) >> Vehicle Stability Control System >> DTC C1442: Invalid Data Received from Acceleration Sensor; DTC C1443: Invalid Data Received from Yaw Rate Sensor >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

When replacing the yaw rate and acceleration sensor, perform zero point calibration. Refer to CALIBRATION .