LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Vehicle Stability Control (Diagnostic Codes & Symptom Tests)) >> Vehicle Stability Control System >> DTC C1422: Master Cylinder Pressure Sensor Zero Point High Malfunction >> Description

DTC C1422: Master Cylinder Pressure Sensor Zero Point High Malfunction: Description

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

The master cylinder pressure sensor is connected to the skid control ECU in the brake actuator assembly.

Fig 1: Master Cylinder Pressure Sensor Circuit Schematic
GTY136527Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DTC Code DTC Detection Condition Trouble Area
C1422 When the stop light switch is OFF, the PMC terminal voltage is more than 0.86 V for 5 seconds or more.
  • Stop light switch
  • Stop light switch circuit
  • Master cylinder pressure sensor circuit
  • Brake actuator assembly (Master cylinder pressure sensor)