Parking Brake Pedal: Inspection: Inspection
WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PARKING BRAKE SWITCH ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
| Tester Connection |
Condition |
Specified Condition |
| 1- Body ground |
Switch Shaft free |
Below 1 Ω |
| 1- Body ground |
Switch Shaft push |
10 kΩ or higher |
If the value is not as specified, replace the parking brake pedal.