LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Meter (Service Information)) >> Steering Pad Switch >> Removal >> Removal

Steering Pad Switch: Removal: Removal

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

  2. REMOVE NO. 3 LOWER STEERING WHEEL COVER  . Refer to REMOVAL - Step 3
  3. REMOVE NO. 2 LOWER STEERING WHEEL COVER  . Refer to REMOVAL - Step 4
  4. REMOVE STEERING PAD  . Refer to REMOVAL - Step 5
  5. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the 2 connectors and disengage the clamp.
      Fig 1: Identifying Connectors And Clamp
      GTY130886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws.
      Fig 2: Identifying Steering Pad Switch Assembly Pins
      GTY151045Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 4 pins and remove the steering pad switch assembly.
scientia non olet · About LEMON Manuals