LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Meter (Service Information)) >> Light Control Rheostat >> Installation >> Installation

Light Control Rheostat: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws and install the light control rheostat.
      Fig 1: Identifying Light Control Rheostat
      GTY129396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the finish panel No. 2 retainer with switch with the 3 screws.
      Fig 2: Identifying Finish Panel No. 2 Screws
      GTY151098Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  . Refer to INSTALLATION - Step 24
  3. INSTALL SIDE INSTRUMENT PANEL LH  . Refer to INSTALLATION - Step 26
  4. INSTALL FRONT DOOR OPENING TRIM COVER LH  . Refer to INSTALLATION - Step 27
  5. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)  . Refer to INSTALLATION - Step 88
  6. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)  . Refer to INSTALLATION - Step 90
scientia non olet · About LEMON Manuals