LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Can Communication (Diagnostics)) >> Can Communication System >> ECM Communication Stop Mode >> Procedure

ECM Communication Stop Mode: Procedure

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ECM POWER SOURCE CIRCUIT 
    1. Check the ECM power source circuit. Refer to ECM Power Source Circuit for 2GR-FSE. Refer to ECM Power Source Circuit for 4GR-FSE).

      OK

      The ECM power source circuit is normal.

      HINT: 

      If there is no abnormality in the ECM power source circuit, replace the ECM.

    NG → REPAIR OR REPLACE ECM POWER SOURCE CIRCUIT 

    OK → REPLACE ECM