LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Lighting (Service Information)) >> License Plate Light Assembly >> Installation >> Installation

License Plate Light Assembly: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Install the license plate light assembly with the 2 claws.
      Fig 1: Identifying License Plate Light Assembly With Claws
      GTY126298Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL LUGGAGE COMPARTMENT DOOR GARNISH ASSEMBLY 
    1. Install the luggage compartment door garnish assembly with the 5 clips.
      Fig 2: Identifying Luggage Compartment Door Garnish Assembly, Clips, & Nuts
      GTY118889Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 3 nuts.
  3. INSTALL REAR LIGHT ASSEMBLY LH  See step  1
  4. INSTALL REAR LIGHT ASSEMBLY RH 
  5. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)  . Refer to INSTALLATION - Step 1
  6. INSTALL LUGGAGE KEY ELECTRICAL SWITCH 
  7. INSTALL LUGGAGE COMPARTMENT DOOR REINFORCEMENT 
  8. INSTALL LUGGAGE COMPARTMENT DOOR COVER 
  9. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  . Refer to REASSEMBLY - Step 13
  10. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE  . Refer to REASSEMBLY - Step 14
  11. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP 
scientia non olet · About LEMON Manuals