LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Lighting (Service Information)) >> AFS Ecu >> Installation >> Installation

AFS Ecu: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEADLIGHT SWIVEL ECU ASSEMBLY 
    1. Install the clamp.
      Fig 1: Identifying Headlight Swivel ECU Assembly , Clamp, & Connector
      GTY137508Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
    3. Install the headlight swivel ECU assembly with the bolt and nut.
      Fig 2: Identifying Bolt And Nut
      GTY137374Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the connector holder with the 2 clips.
      Fig 3: Identifying Connector Holder With Clips
      GTY151211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 25
  3. INSTALL FRONT DOOR OPENING TRIM COVER LH  . Refer to INSTALLATION - Step 27
  4. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)  . Refer to INSTALLATION - Step 88
  5. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)  . Refer to INSTALLATION - Step 90