Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
| One of the following conditions is met: | A, B or C |
| A. All of the following conditions are met: | a, b and c |
| a. Battery voltage | 11 V or more, and less than 13 V |
| b. Target duty ratio | Less than 70% |
| c. Output signal duty ratio | 100% or more |
| B. All of the following conditions are met: | d, e and f |
| d. Battery voltage | 13 V or more |
| e. Target duty ratio | Less than 80% |
| f. Output signal duty ratio | 100% or more |
| C. All of the following conditions are met: | g and h |
| g. Current cut status | Not cut |
| h. Output signal duty ratio | 3% or less |