Typical Enabling Conditions
WARNING: This page is about a different car, the 2009 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever these DTCs are not present | None |
| Time after engine start | 5 seconds or more |
| Output duty ratio | More than output duty ratio change map value, and less than 95% |
| Battery voltage | 10.5 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Output duty ratio change map value | - |
| Engine speed is 500 RPM | 5% |
| Engine speed is 2000 RPM | 20% |
| Engine speed is 4000 RPM | 40% |
| Engine speed is 6000 RPM | 60% |
| Engine speed is 8000 RPM | 80 % |