LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Suspension (Service Information)) >> Front Upper Suspension Arm >> Installation >> Installation

Front Upper Suspension Arm: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FRONT UPPER SUSPENSION ARM 
    1. Install the front upper suspension arm with the 2 bolts.
      Fig 1: Identifying Front Suspension Upper Arm And Bolts
      GTY108615Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf) 

  2. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING (for 2WD)  See step  2
  3. INSTALL FRONT SHOCK ABSORBER WITH COIL SPRING (for 4WD)  See step  2
scientia non olet · About LEMON Manuals