Customize Parameters
- CUSTOMIZING FUNCTION WITH TECHSTREAM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on.
- Turn the Techstream on.
- Enter the following menus: Customize Setting.
- Select the setting by referring to the table below.WARNING
Display Default Contents Setting Driver Side Seatbelt Warning Buzzer ON To change the seat belt warning buzzer. ON/OFF Front Passenger Side Seatbelt Warning Buzzer ON To change the seat belt warning buzzer. ON/OFF UNIT CONVERSIONDisplay Default Contents Setting Units By Region Different for each vehicle To change the units of the display. Km/l JP / Km/l / Ml/g US / Ml/g UK DISPLAYDisplay Default Contents Setting Language None To change the language of the display. Eng US / Eng UK / French / German / Spanish / Italian / Japanes / CHN Sim / CHN Trd