DTC P1606-308: Collision Detection; DTC P1606-317: Collision Detection: Procedure

1. Check the vehicle condition.

   Result

   Result	Proceed to
   The vehicle is not damaged.	A
   The vehicle is damaged.	B

B → REPAIR VEHICLE 

A: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
4. Check if DTCs are output.

   Result

   DTC No.	Proceed to
   P1606 only is output.	A
   P0A1D is output.	B

B → See step   7 

A: Go to next step 

1. Troubleshoot the airbag system.

   Result

   Result	Proceed to
   The system is normal.	A
   There is a malfunction in the system.	B

B → REPAIR MALFUNCTIONING PARTS, COMPONENT AND AREA 

A: Go to next step 

1. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
2. Access the freeze frame data of DTC P1606 and read the INF code.

   Result

   Result	Proceed to
   INF code 308 is output.	A
   INF code 317 is output.	B

B → See step   5 

A → See step   8 

1. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.
2. Check if DTCs are output.

   Result

   Result	Proceed to
   Either U0151-763 or P0A09-591 is output.	A
   Neither U0151-763 nor P0A09-591 is output.	A
   Both U0151-763 and P0A09-591 are output.	B

B → See step   6 

A → See step   9