Installation

WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION

INSTALLATION

1. INSTALL WASHER LEVEL WARNING SWITCH ASSEMBLY





(a) Install the washer level warning switch assembly.
(b) Connect the connector.
2. INSTALL FRONT BUMPER ASSEMBLY Installation
3. ADD WASHER FLUID Installation
4. INSTALL RADIATOR GRILLE PROTECTOR Installation
5. INSTALL COOL AIR INTAKE DUCT SEAL Installation
6. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT Adjustments
7. PREPARATION FOR FOG LIGHT AIMING Adjustments
8. INSPECT FOG LIGHT AIMING Adjustments
9. ADJUST FOG LIGHT AIMING Adjustments