Installation

AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: PATTERN SELECT SWITCH: INSTALLATION

INSTALLATION

1. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY





(a) Engage the 2 claws and install the pattern select switch to the switch base.





(b) Engage the 4 claws and install the switch base to the lower instrument panel finish panel.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
3. INSTALL SIDE INSTRUMENT PANEL LH Installation
4. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
5. INSTALL FRONT DOOR SCUFF PLATE LH Installation