Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Removal
4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH Removal
5. REMOVE CONSOLE PANEL SUB-ASSEMBLY Removal
6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY Removal
7. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
8. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal
9. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System) Removal
10. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System) Removal
11. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY





(a) Remove the bolt.





(b) Remove the tire pressure warning receiver assembly.