Camshaft Bearing Cap

CAMSHAFT BEARING CAP (for Bank 1)







Temporarily install the 20 bolts in the sequence shown in the illustration.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Tighten the 20 bolts in the sequence shown in the illustration.
Torque: 19 Nm (190 kgf-cm, 14 ft-lbf)

CAMSHAFT BEARING CAP (for Bank 2)







Temporarily install the 20 bolts in the sequence shown in the
illustration.

Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Tighten the 20 bolts in the sequence shown in the illustration.
Torque: 19 Nm (190 kgf-cm, 14 ft-lbf)