Diagnosis System

SEAT BELT: SEAT BELT WARNING SYSTEM: DIAGNOSIS SYSTEM

DIAGNOSIS SYSTEM

1. DESCRIPTION
(a) Data of the system can be read in the Data Link Connector 3 (DLC3) of the vehicle. Therefore, when the system seems to be malfunctioning, use the Techstream to check for a malfunction and repair it.
2. CHECK DLC3
(a) Check the DLC3 General Information.
3. INSPECT BATTERY VOLTAGE
(a) Check the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, replace the battery before proceeding.