Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL

REMOVAL

1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing Service Precautions.
NOTE:
When replacing the occupant classification ECU, perform registration Registration.

2. REMOVE FRONT SEAT HEADREST ASSEMBLY RH
3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side Removal.

4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side Removal.

5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side Removal.

6. REMOVE REAR INNER SEAT TRACK BRACKET COVER RH
HINT: Use the same procedure for the RH side and the LH side Removal.

7. REMOVE FRONT SEAT ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side Removal.

8. REMOVE OCCUPANT CLASSIFICATION ECU





(a) Disconnect the connector from the occupant classification ECU.
NOTE:
When disconnecting the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 2 nuts and occupant classification ECU.