Reassembly

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY

REASSEMBLY

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY





(a) Connect the connector and install the rear combination light socket and wire sub-assembly.
2. INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.





(b) Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow in the illustration and install them as a unit.
3. INSTALL REAR COMBINATION LIGHT BODY GASKET





(a) Install a new rear combination light body gasket.