Initial Inspection and Diagnostic Overview

METER / GAUGE / DISPLAY: CLOCK SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.

3. PROBLEM SYMPTOM CONFIRMATION
NEXT -- Continue to next step.

4. PROBLEM SIMULATION
NEXT -- Continue to next step.

5. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table Symptom Related Diagnostic Procedures.
NEXT -- Continue to next step.

6. CIRCUIT INSPECTION
NEXT -- Continue to next step.

7. REPAIR OR REPLACE
NEXT -- Continue to next step.

8. CONFIRMATION TEST
NEXT -- END