Removal

HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side Removal.

2. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT: Use the same procedure for the RH side and LH side Removal.

3. REMOVE SIDE INSTRUMENT PANEL RH Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
5. REMOVE SKID CONTROL ECU Removal
6. REMOVE COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY





(a) Disconnect the connector.
(b) Remove the 3 screws and the cooling unit with fan motor sub-assembly.