Radiator Cooling Fan Motor Relay: Testing and Inspection

2UR-GSE COOLING: RELAY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT FAN NO. 1 RELAY





(a) Remove the relay from the engine room No. 1 relay block.
(b) Measure the resistance of the relay.
Standard Resistance:





If the result is not as specified, replace the relay.
(c) Install the relay to the engine room No. 1 relay block.
2. INSPECT FAN NO. 2 RELAY





(a) Remove the relay from the engine room No. 1 relay block.
(b) Measure the resistance of the relay.
Standard Resistance:





If the result is not as specified, replace the relay.
(c) Install the relay to the engine room No. 1 relay block.