Disassembly

BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER: DISASSEMBLY

DISASSEMBLY

1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
(a) Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.
2. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
(a) Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.
3. REMOVE BRAKE MASTER CYLINDER RING PIN
(a) Mount the brake master cylinder sub-assembly in a vise.
NOTE:
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.





(b) Using a pin punch and a hammer, tap out and remove the brake master cylinder ring pin.
4. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
(a) Remove the brake master cylinder reservoir assembly from the brake master cylinder body.
5. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a) Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.