Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH Removal
3. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal
4. REMOVE SIDE INSTRUMENT PANEL LH Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
6. REMOVE VSC OFF SWITCH





(a) Disengage the 4 claws and remove the VSC off switch with the switch base.





(b) Disengage the 2 claws and remove the VSC off switch from the switch base.