Reading and Clearing Diagnostic Trouble Codes

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Body / Trouble Codes.
(e) Check the details of the DTC(s) Power Door Lock Control System.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Body / Trouble Codes.
(e) Clear the DTCs.