Removal

AUDIO / VIDEO: STEERING PAD SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
4. REMOVE STEERING PAD Removal
5. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the cruise switch connector.





(b) Disengage the connector clamp.
(c) Disconnect the pad switch connector.





(d) Remove the screw.
(e) Disengage the 2 claws and remove the steering pad switch.





(f) Remove the screw.
(g) Disengage the 2 claws and remove the steering pad switch.