LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> OEM System Circuits >> Remote Control Mirror (w/ Seat Position Memory) >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
AE1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS (2GR-FSE) Engine Room Main Wire and Engine Wire (Inside of the ECU Box)
: LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS (4GR-FSE)
JA3 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Left Kick Panel)
JA4 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Right Kick Panel)
JQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Floor No. 2 Wire (Left Kick Panel)
LP1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door RH Wire and Floor No. 1 Wire (Cowl Side Panel RH)
LP2
MQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door LH Wire and Floor No. 2 Wire (Cowl Side Panel LH)
MQ2
PQ2 : CONNECTOR JOINING WIRE HARNESS, WIRE HARNESS, AND : GROUND POINT LOCATIONS Floor No. 1 Wire and Floor No. 2 Wire (Right Side of the Rear Floor Partition Panel)