LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> OEM System Circuits >> Light Auto Turn Off System >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
JP2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Floor No. 1 Wire (Right Kick Panel)
JQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Floor No. 2 Wire (Left Kick Panel)
LP1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door RH Wire and Floor No. 1 Wire (Cowl Side Panel RH)
MQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Front Door LH Wire and Floor No. 2 Wire (Cowl Side Panel LH)
MQ2
NP1 : CONNECTOR JOINING WIRE HARNESS, WIRE HARNESS, AND : GROUND POINT LOCATIONS Rear Door No. 1 Wire and Floor No. 1 Wire (Center Pillar RH)
OQ1 : CONNECTOR JOINING WIRE HARNESS, WIRE HARNESS, AND : GROUND POINT LOCATIONS Rear Door No. 2 Wire and Floor No. 2 Wire (Center Pillar LH)
PQ2 : CONNECTOR JOINING WIRE HARNESS, WIRE HARNESS, AND : GROUND POINT LOCATIONS Floor No. 1 Wire and Floor No. 2 Wire (Right Side of the Rear Floor Partition Panel)