LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> IS 250 RWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> OEM System Circuits >> Engine Control (2GR-FSE) >> : Connector Joining Wire Harness and Wire Harness

: Connector Joining Wire Harness and Wire Harness

Code See Joining Wire Harness and Wire Harness (Connector Location)
AE1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS (2GR-FSE) Engine Room Main Wire and Engine Wire (Inside of the ECU Box)
BA2 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS (2GR-FSE) Engine Room No. 2 Wire and Engine Room Main Wire (Inside of the Engine Room R/B No. 2)
EG1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS (2GR-FSE) Engine Wire and Engine No. 5 Wire (Rear Side of the Left Cylinder Head)
Ei1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS (2GR-FSE) Engine Wire and Engine No. 8 Wire (Front Side of the Surge Tank)
JA3 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Left Kick Panel)
JA4 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Engine Room Main Wire (Right Kick Panel)
JQ1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Instrument Panel Wire and Floor No. 2 Wire (Left Kick Panel)
QA1 : LOCATION OF CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS Floor No. 2 Wire and Engine Room Main Wire (Upper the Cowl Side Panel LH)