Rear Console Box: Disassembly: Disassembly

REMOVE CONSOLE BOX CUP HOLDER SUB-ASSEMBLY
1. Remove the console box cup holder sub-assembly.
  
  Fig 1: Removing Console Box Cup Holder Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  When removing the console box cup holder sub-assembly, do not hold the center part of the sub-assembly in order to prevent the cup holder from breaking.
REMOVE FRONT UPPER CONSOLE PANEL GARNISH
1. Using a molding remover, disengage the 2 claws.
  
  Fig 2: Identifying Front Upper Console Panel Garnish And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 4 claws and remove the front upper console panel garnish.
REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
1. Remove the 2 screws.
  
  Fig 3: Identifying Console Compartment Door Lock Sub-Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Open the console compartment door lock sub-assembly in the direction indicated by the arrow to remove it.
  
  Fig 4: Opening Console Compartment Door Lock Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
1. While pushing down on the lock using a screwdriver with its tip taped, slide the console door in the direction shown by the arrow to remove it.
  
  Fig 5: Removing Console Compartment Door Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE COMPARTMENT DOOR CUSHION
1. Remove the 2 console compartment door cushions from the console box.
REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY
1. Disengage the 2 claws and remove the console box illumination light assembly.
  
  Fig 6: Identifying Console Box Illumination Light Assembly And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POWER OUTLET SOCKET ASSEMBLY . Refer to REMOVAL - Step 11
REMOVE POWER POINT SOCKET COVER
1. Disengage the 2 claws and remove the power point socket cover.
REMOVE AUDIO TERMINAL . Refer to REMOVAL - Step 11