Ambient Temperature Does Not Display: Procedure

1. Remove cooler (ambient temp. sensor) thermistor.
   Fig 1: Identifying Cooler (Ambient Temp. Sensor) Thermistor Connector Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Measure resistance between terminals 1 and 2 of cooler (ambient temp. sensor) thermistor connector at each temperature.
   Fig 2: Measuring Resistance Between Terminals 1 & 2 Of Cooler (Ambient Temp. Sensor) Thermistor Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT: 

   As the temperature increases, the resistance decreases.

   Standard resistance

   Temperature °C (°F)	Specification kΩ
   10 (50)	3.00 to 3.73
   15 (59)	2.45 to 2.88
   20 (68)	1.95 to 2.30
   25 (77)	1.60 to 1.80
   30 (86)	1.28 to 1.47
   35 (95)	1.00 to 1.22
   40 (104)	0.80 to 1.00
   45 (113)	0.65 to 0.85
   50 (122)	0.50 to 0.70
   55 (131)	0.44 to 0.60
   60 (140)	0.36 to 0.50

NG → REPLACE THERMISTOR ASSEMBLY 

OK: Go to next step 

NG → REPAIR OR REPLACE HARNESS OR CONNECTOR 

OK → REPLACE ACCESSORY METER ASSEMBLY