Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS CHART
| Starter | OFF |
| Engine speed | Less than 1500 rpm |
| Spark cut | Not Executed |
| Either A or B condition is met | - |
| A. Following conditions are met | (a) and (b) |
| (a) Engine speed | 500 rpm or lower |
| (b) Battery voltage | 6 V or higher |
| B. Following conditions are met | (a), (b) and (c) |
| (a) Engine speed | Higher than 500 rpm |
| (b) Battery voltage | 10 V or higher |
| (c) Number of sparks after CPU is reset | 5 sparks or more |