Tire And Wheel System: Inspection

INSPECT TIRE

Check the tires for wear and proper inflation pressure.

Cold tire inflation pressure

COLD TIRE INFLATION PRESSURE SPECIFICATION

Tire size	Front kPa (kgf/cm² , psi)	Rear kPa (kgf/cm² , psi)
225/65R17 101S	220 (2.2, 32)	220 (2.2, 32)
P235/55R18 99V	210 (2.1, 30)	210 (2.1, 30)

for KOREA

COLD TIRE INFLATION PRESSURE SPECIFICATION

Tire size	Front kPa (kgf/cm² , psi)	Rear kPa (kgf/cm² , psi)
235/55R18 101S	220 (2.2, 32)	220 (2.2, 32)

Using a dial indicator, check the tire runout (vertical and horizontal).
Tire runout: 1.4 mm (0.055 in.) or less

ROTATE TIRES
1. See the illustration for where to rotate each tire.
Fig 1: Identifying Tires Rotation
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT WHEEL BALANCE
1. Check and adjust the off-the-car balance.
2. If necessary, check and adjust the on-the-car balance.
  Imbalance after adjustment: 8.0 g (0.018 lb) or less
INSPECT BEARING LOOSENESS (See ON-VEHICLE INSPECTION )
INSPECT AXLE HUB RUNOUT (See ON-VEHICLE INSPECTION )