Inspection Procedure
WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.
- READ OUTPUT DTC (ALL)
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch to the ON position.
- Select the following menu items: DIAGNOSIS / OBD/ MOBD / HV ECU / DTC INFO / CURRENT CODES.
- Read output DTCs.
Result
OUTPUT DTC (ALL)Output DTC Proceed to U0100-211, U0100-212, or U0100-530 only is output. A DTCs other than above are output. B
A: REPLACE HYBRID VEHICLE CONTROL ECU
B: GO TO CAN COMMUNICATION SYSTEM