LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 400h FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Service Information) >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Remove the 2 bolts and the brake pedal stroke sensor assembly.
  2. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Loosen the stop light switch lock nut and remove the stop light switch assembly from the brake pedal support assembly.
    Fig 1: Locating Brake Pedal Stroke Sensor Assembly Bolts
    G05202877Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE BRAKE PEDAL 
    1. Remove the nut, the washer, the bolt and the brake pedal from the brake pedal support assembly.
  4. REMOVE BRAKE PEDAL PAD 
  5. REMOVE STOP LIGHT SWITCH CUSHION 
  6. REMOVE BRAKE PEDAL SHAFT COLLAR 
  7. REMOVE BRAKE PEDAL BUSHING 
    1. Remove the 2 brake pedal bushings from the brake pedal.
    Fig 2: Identifying Brake Pedal Support Assembly
    G05277033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE BRAKE PEDAL SUPPORT 
NOTE: Do not disassembly the upper support portion. If disassembled, be sure to replace it with new parts.
Fig 3: Locating Brake Pedal Bushings
G05277034Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals