Front Bumper: Removal

REMOVE FRONT BUMPER STAY CENTER
1. Remove the 5 clips and front bumper stay center.
  
  Fig 1: Identifying Front Bumper Stay Center Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT BUMPER ASSEMBLY
1. Using a hexagon 4 mm wrench, remove the hexagon screw.
  
  Fig 2: Identifying Hexagon Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Put protective tape under the front fender.
3. Remove the 6 screws and 2 bolts.
4. Release the 6 claws and front bumper assembly.
5. w/ headlight washer:
  1. Remove the washer hose clip.
6. Disconnect the fog light connectors.
  
  Fig 3: Identifying Front Bumper Assembly Claws Screws And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002