LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 400h FWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Front Bumper >> Reassembly

Front Bumper: Reassembly

  1. REMOVE FRONT BUMPER GARNISH (w/ Radar Cruise) 
  2. INSTALL FOG LIGHT ASSEMBLY LH 
  3. INSTALL FOG LIGHT ASSEMBLY RH 
  4. INSTALL FOG LIGHT PROTECTOR LH 
  5. INSTALL FOG LIGHT PROTECTOR RH 
  6. INSTALL FRONT BUMPER HOLE COVER LH 
  7. INSTALL FRONT BUMPER HOLE COVER RH 
  8. INSTALL FOG LIGHT MOUNTING BRACKET LH 
  9. INSTALL FOG LIGHT MOUNTING BRACKET RH 
  10. INSTALL RADIATOR GRILLE GARNISH 
  11. INSTALL RADIATOR GRILLE GARNISH NO. 2 
  12. INSTALL RADIATOR GRILLE GARNISH NO. 3 
  13. INSTALL RADIATOR GRILLE GARNISH CLIP 
  14. INSTALL RADIATOR GRILLE BRACKET NO. 2 
  15. INSTALL HEADLIGHT CLEANER HOSE 
  16. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Washer)  (See INSTALLATION )
  17. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Washer) 
  18. INSTALL HEADLIGHT CLEANER WASHER NOZZLE (w/ Headlight Washer) 
  19. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET 
  20. INSTALL FRONT BUMPER STAY NO. 2 RH 
  21. INSTALL FRONT BUMPER STAY NO. 2 LH 
  22. INSTALL FRONT BUMPER REINFORCEMENT 
    1. Install the front bumper reinforcement with the 6 bolts.

      Torque: 77 N*m (785 kgf*cm, 57 ft.*lbf) 

      2. Fig 1: Identifying Front Bumper Reinforcement And Bolts
      G05281661Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. INSTALL FRONT BUMPER STAY REINFORCEMENT 
  24. INSTALL FRONT BUMPER ENERGY ABSORBER 
scientia non olet · About LEMON Manuals