DTC Check / Clear

DTC CHECK/CLEAR (USING TECHSTREAM)
1. DTC check
  1. Connect the Techstream to the DLC3.
  2. Turn the ignition switch ON.
  3. Read DTCs on the tester screen.
2. DTC clear
  1. Connect the Techstream to the DLC3.
  2. Turn the ignition switch ON.
  3. Clear the DTCs following the prompts on the tester screen.
    HINT:
    
    The Techstream has a SNAPSHOT function which records the monitored data. Refer to the Techstream operator's manual for further details.