Rear Console Box: Removal

1. Slide the front seat assemblies RH and LH forward.
2. Slide the console box assembly fully to the back end and remove the console box hole cover.

HINT:

Use the same procedures for the console box No.2 hole cover and the console box hole cover.

Fig 1: Removing Console Box No.2 Hole Cover

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Separate the console box lock control cable assembly from the rear console box.
   Fig 2: Locating Console Box Lock Control Cable

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Keeping the rear console box pulled in the rear direction of the vehicle, remove the 6 bolts from the left and right sides.
   Fig 3: Identifying Rear Console Box Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect each of the clamp and connector.
4. Remove the rear console box.