Rear Wiper Motor: Removal

REMOVE REAR WIPER ARM COVER
1. Remove rear wiper arm cover.
REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
1. Remove the nut, rear wiper arm and blade assembly.
REMOVE REAR WIPER SHAFT COVER
1. Remove the rear wiper shaft cover.
  
  Fig 1: Identifying Rear Wiper Shaft Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR NO.1 WIPER LINK PIVOT NUT
1. Using the socket wrench 27 mm (1.06 in.), remove the rear No. 1 wiper link pivot nut.
  
  Fig 2: Identifying Rear No.1 Wiper Link Pivot Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR NO.1 WIPER LINK PIVOT WASHER
1. Remove the rear No. 1 wiper link pivot washer.
  
  Fig 3: Identifying Rear Wiper Link Pivot Washer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER (See DISASSEMBLY )
REMOVE REAR WIPER MOTOR ASSEMBLY
1. Disconnect the connector.
2. Remove the 3 bolts and the rear wiper motor assembly.
  
  Fig 4: Locating Rear Wiper Motor Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002