Front Wiper Motor: Removal

REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
1. Remove the 2 nuts and the front wiper arm and blade assembly RH.
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
1. Remove the nut and the front wiper arm and blade assembly LH.
REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
1. Remove the 2 clips.
2. Disengage the 6 claws and the clamp, and remove the cowl top ventilator louver sub-assembly.
  
  Fig 1: Identifying Cowl Top Ventilator Louver Sub-Assembly Clips, Clamp And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
1. Disconnect the connector.
2. Remove the 5 bolts and the windshield wiper motor and link assembly.
  
  Fig 2: Locating Windshield Wiper Motor And Link Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
1. Using a screwdriver wrapped with protective tape, separate the rod of the wiper link assembly from the windshield wiper motor assembly as shown in the illustration.
  
  Fig 3: Separating Rod Of Wiper Link Assembly Windshield Wiper Motor Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the nut and washer. Then, put the matchmarks on the crank arm assembly and windshield wiper motor assembly.
  
  Fig 4: Aligning Matchmarks On Crank Arm Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 bolts and windshield wiper motor assembly from the windshield wiper link assembly.
  
  Fig 5: Locating Windshield Wiper Motor Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002