LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 350 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> License Plate Light Assembly >> Removal

License Plate Light Assembly: Removal

  1. REMOVE BACK DOOR TRIM PANEL ASSEMBLY UPPER  (See DISASSEMBLY )
  2. REMOVE BACK DOOR TRIM PANEL ASSEMBLY  (See DISASSEMBLY )
  3. REMOVE BACK DOOR GARNISH  (See REMOVAL )
  4. REMOVE LICENSE PLATE LIGHT ASSEMBLY 
    1. Disengage the 2 claws and separate the license plate light assembly.
    2. Disconnect the connector and remove the license plate light assembly.
      Fig 1: Removing License Plate Light Assembly Claws
      G05273977Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals